Type A - Plain Mounting

Letters have no installation hardware supplied.

Type B - Flange Mounting

Letters have a flat 3/16" to 7/16" perimeter on the back edge of the letter return. If a wider flange is preferred, specify with your quote. Flanges not recommended for 6 and smaller letters as well as some 8" styles.

Type C - Stud Mounting

Letters are provided with metal studs on the rear of the letters. Specify length of studs - 1,2,3,4,5 or 6 inch lengths and whether studs need to be in-line for brick or block walls. Mounting templates are required for this installation.

Type D - Pad Mounting

Letters have plastic pads on the rear of the letters to be used with silicone adhesive to secure to mounting surface. Letter 12" and over come with pads that are adjustable for leveling on irregular surfaces, smaller sizes come with permanently fixed pads.

Type E - Stud/Pad Combo Top

Letters have a combination of pads and studs on top while having pads only on the bottom of each letter. Recommendations and restrictions for TYPE C and TYPE D mountings apply.

Type F - Stud/Pad Combo All

Letters have a pad and stud combination on both top and bottom of each letter. Recommendations and restrictions for TYPE C and TYPE D mountings apply.